Fischer pipe clamp FRS Plus - 12-15 mm
Two-bolt pipe clamp with quick-release fastener and loss protection.
For uncomplicated and time-saving one-hand installation.
Galvanised steel. Including sound insulation insert.
Available in clamping ranges from 12-15 mm (1/4") to a maximum of 108-116 mm (4").
Sound insulation insert: EPDM; chlorine- and silicone-free; -40 °C to +100 °C
Pipe clamp DIN 1592 - 7 mm - WB
Single-lug clamp, heavy-duty version in accordance with DIN 1592 - without nuts and bolts.
Fixing clamps available as standard up to 61 mm internal diameter.
Material dimensions from 16 x 2 mm to 40 x 8 mm solid steel.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Bolts must be purchased separately.
Please refer to the data sheet for technical details.
Pipe clamp DIN 1593 - 7 mm - WB
Solid half clamps, heavy-duty design in accordance with DIN 1593 - without nuts and bolts.
Available as standard up to 220 mm internal diameter.
Material dimensions from 16 x 2 mm to 50 x 8 mm solid steel.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Screws must be purchased separately.
Please enquire for larger diameters.
Please refer to the data sheet for technical details.
Pipe clamp DIN 1596 - 7 mm - WB
Single-lug clamp, lightweight design in accordance with DIN 1596 - without nuts and bolts.
Available as standard up to 61 mm internal diameter.
Material dimensions from 16 x 2 mm to 40 x 4 mm solid steel.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Bolts must be purchased separately.
Please refer to the data sheet for technical details.
Pipe clamp DIN 1597 - 7 mm - WB
Half clamps, lightweight design in accordance with DIN 1597 - without nuts and bolts.
Available as standard up to 61 mm internal diameter.
Material dimensions from 16 x 1.5 mm to 30 x 3 mm solid steel.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Bolts must be purchased separately.
Please refer to the data sheet for technical details.
Pipe clamp DIN 3567 - 20 mm - DN 15 - WB
Solid pipe clamps in accordance with DIN 3567 - without bolts and nuts.
Available as standard up to 220 mm internal diameter.
1 DIN pipe clamp consists of 2 half shells. Bolts and nuts must be purchased separately.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Please enquire about larger diameters.
Please refer to the data sheet for technical details.
Pipe clamp Fischer FRS - 15-19 mm
Two-bolt pipe clamp with loss protection.
Model fischer FRS. Made of A4 stainless steel including sound insulation insert.
Available in clamping ranges from 15-19 mm (3/8") to a maximum of 102-116 mm (4").
Sound insulation insert: EPDM; chlorine and silicone-free; -40 °C to +100 °C
Round steel bracket ETR - Variant: ETR 8-13
The tried and tested round steel bracket from fischer for quick and flexible fixing of different pipework.
Available in different versions from 8 - 219 mm clamping range.
An ideal addition to our brackets and mounting profiles.
The fischer ETR round steel brackets are galvanised and supplied with nuts.
