Hammerhead fastener 41/41 - M8 x 30 mm

Quantity	Unit price
To 9	€1.61
To 24	€1.45
To 49	€1.29
To 99	€1.20
From 100	€1.12

Produktinformationen Hammerhead fastener 41/41 - M8 x 30 mm - ZN

Threaded plate with bolt pressed into a screw. Completely pre-assembled with washer and nut and therefore ready for immediate use. For quick and easy fastening of pipe clamps and other loads.

Suitable for profiles: 41/22, 41/41, 41/62, 41/82 and the associated double profiles

Head dimensions:
M8: 35 x 20 x 6 mm (L x W x H) - thread length up to 100 mm
M10: 35 x 20 x 6 mm (L x W x H) - thread length up to 100 mm
M12: 35 x 20 x 6 mm (L x W x H) - thread length up to 80 mm

Hammerhead fasteners are the cost-effective alternative to our hammerhead and hook-head screws. Our original Bullfix hammerhead fasteners are supplied pre-assembled including nut and washer.

They are used wherever relatively light loads need to be mounted at a large number of fixing points. This is mainly the case in the heating, air conditioning and sanitary sector.

As with the hammer-head screws, the hammer-head fasteners 41/41 can also be retrofitted via the profile slot and positioned precisely on the profile rail.

The type designation refers to the compatibility with different profiles and not to the dimensions of the screw head. An overview of the suitable screw types for different profiles is available in the downloads.

Advantages at a glance:
- Quick and easy installation: The hammer-head fastener 41/41 can be inserted directly into the mounting rail at the desired position, without the need to slide it in from the side.
- Completely pre-assembled, there is also no need to fit a washer and nut, which saves time during installation.
- Flexibility: The screw can be inserted inside the profile Flexibility: The screw can be moved within the profile rail and enables precise alignment of the components.
- Reusability: Like the hammerhead screws, the pre-assembled hammerhead fasteners are easy to remove and can be reused if required.

Functionality and application:
Hammerhead fasteners can be placed in any position in the profile, just like the hammerhead and hook-head bolts. A 90 degree turn locks the head in the profile and ensures that it fits snugly against the rail lip. Even if the screw head is not accessible, a nut can be used to tighten the screw. The screws can be loosened, precisely aligned and refastened or removed at any time without the need for special tools. A slot on the underside of the thread indicates the correct alignment of the screw head in the mounting rail. The large contact surface of the screw head in the profile ensures high stability and load-bearing capacity. The serration allows loads to be securely fastened even when installed vertically.
The pre-assembled hammer-head fastener 41/41 is an efficient fastening solution that saves time, offers flexible application options and is suitable for a wide range of applications. Discover the benefits of our hammer-head and hook-head fasteners and optimise your assembly processes with Bullfix. Our screws are also compatible with most systems from leading manufacturers. You can find an overview of the most common systems and the matching Bullfix screws in our information section.

The Bullfix hammerhead fastener 41/41 is an alternative to fastening screws from well-known manufacturers such as Würth Varifix hammerhead fastener Standardfix, Walraven Strut hammerhead fastening set, the Unistrut Stud Nut, OBO Bettermann MS41HB, Hilti HHK hammerhead screws or Fischer FCSN.