Hammerhead fastener 26/18 - M8 x 50 mm - ZN
Product number:
SC2618BV.850.ZN
available
delivery time: 1–5 days
| Quantity | Unit price |
|---|---|
| To 9 |
€1.37
|
| To 24 |
€1.23
|
| To 49 |
€1.09
|
| To 99 |
€1.03
|
| From 100 |
€0.96
|
Produktinformationen Hammerhead fastener 26/18 - M8 x 50 mm - ZN
Threaded plate with bolt pressed into a screw. Completely pre-assembled with washer and nut and therefore ready for immediate use. For quick and easy fastening of pipe clamps and other loads.
Suitable for profiles: 28/12, 28/15, 28/28, 28/38, 26/18, 26/26, 27/18
Head dimensions:
M8: 22 x 13 x 4 mm (L x W x H) - Thread length up to 80 mm
Hammer head fasteners offer a cost-effective alternative to our hammer and hook head screws. The original Bullfix hammerhead fasteners are supplied pre-assembled including nut and washer, which simplifies the installation process.
They are particularly suitable for applications where lighter loads need to be attached to multiple fixing points, such as in the heating, air conditioning and plumbing sectors. similar to hammer-head screws, the hammer-head fasteners 26/18 can also be inserted subsequently via the profile slot and positioned precisely on the profile rail.
The type designation indicates which profiles the fasteners are compatible with, not the dimensions of the screw head. Further information on suitable screw types for different profiles can be found in the downloads.
Advantages at a glance:
Quick and easy installation: The hammer-head fastener 26/18 can be inserted directly into the mounting rail at the desired position without having to slide it in from the side. As the fasteners are supplied fully pre-assembled, there is no need to fit washers and nuts separately, which reduces installation time.
Flexibility: The fasteners can be moved within the profile rail, allowing precise alignment of the components.
Reusability: Like the hammer-head screws, the pre-assembled hammer-head fasteners are easy to remove and can be reused if required.
Functionality and application:
Hammerhead fasteners can be placed anywhere in the profile. A 90-degree turn locks the head securely into the profile, ensuring a positive fit against the rail lip. Even if the screw head is not accessible, the fastening can be carried out with a nut. These fasteners can be loosened, precisely aligned and refastened or removed at any time without the need for special tools. A slot on the underside of the thread indicates the correct alignment of the screw head in the mounting rail. The large contact surface of the head in the profile ensures high stability and load-bearing capacity.
The pre-assembled hammer-head fastener 26/18 is an efficient fastening solution that saves time, offers versatile application options and is suitable for many different areas of use. Discover the advantages of our hammer and hook head fasteners and optimise your assembly processes with Bullfix. Our fasteners are compatible with most systems from leading manufacturers. You can find an overview of the most common systems and the matching Bullfix screws in our information material.
The pre-assembled Bullfix hammerhead fastener 26/18 is an alternative to fastening screws from well-known manufacturers such as Würth Varifix hammerhead fastener Standardfix, OBO hammerhead screw CL27HB, or the Stabilo Sanitär hammerhead screw.