Bracket 41/41 - 600 mm - ZN
Product number:
KO4141.600.ZN
Is often bought in addition
Skip product gallery
Is often bought in addition
Bracket 41/41 - 200 mm - ZN
Rail bracket for mounting on the wall - made in Germany. Dimensions: Profile: 41 x 41 x 2.5 [mm] Bracket: 200 mm - 1,000 mm Rail slot: 18 mm Hole pattern: 13 x 20 [mm] at 50 mm centres Steel rail lip: fluted Stainless steel rail lip: smooth Matching screws: Hammerhead screws 41/21 Hammerhead fastener 41/41 Threaded plate 41/41 Threaded plate 41/41 with fixing aid Extensive range of mounting accessories. Other lengths, surfaces and hole patterns are available on request.   Discover the flagship of BULLFIX - our solid mounting bracket. This bracket is characterised by a stable profile measuring 41 x 41 mm and a material thickness of 2.5 mm and is the ideal choice for mounting loads in the medium range. Installation is particularly easy thanks to two elongated holes in the base plate, which allow the support bracket to be easily adjusted. Our wall brackets with the tried-and-tested 41/41 mm profile cross-section and galvanised surface have been specially developed for use indoors or in dry environments. A considerable proportion of our range of mounting brackets is also available in a stainless steel version. We also offer our support brackets in profile 41/41 as heavy-duty brackets with an additional diagonal brace for increased loads. The installation brackets with the 41 x 41 x 2.5 mm profile are specially designed for efficient and professional installation of systems such as water pipes or ventilation ducts in the domestic and industrial sanitary sector. As a further possible application, the brackets can be used as a suspension bracket for suspending cable trays and mesh cable trays as support systems on ceiling structures. In our online shop you will find a selection of suitable hammer-head bolts and threaded plates for our cantilever brackets as well as a comprehensive range of installation accessories to realise even complex construction projects. All BULLFIX cantilever brackets are produced in Germany. In direct comparison with products from other suppliers, BULLFIX cantilever brackets offer an economically favourable alternative. Comparable products include brackets from the Würth-Varfix series, Walraven Rapidrail wall brackets, Fischer FCA cantilever brackets, Unistrut cantilever arms or brackets from the Halfen KON series.   Suitable for this: Hammerhead bolts 41/22 Z, hammerhead fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid. Further mounting accessories and pipe clamps can be found in the corresponding category. For individual requirements, we also offer other lengths, hole patterns and surfaces on request.
Bracket 41/41 - transverse - 200 mm - ZN
Rail bracket for mounting on the wall - made in Germany. Dimensions: Profile: 41 x 41 x 2.5 [mm] Bracket: 200 mm - 1,000 mm Rail slot: 18 mm Hole pattern: 13 x 20 [mm] at 50 mm centres Steel rail lip: fluted Stainless steel rail lip: smooth Matching screws: Hammerhead screws 41/21 Hammerhead fastener 41/41 Threaded plate 41/41 Threaded plate 41/41 with fixing aid Extensive range of mounting accessories. Other lengths, surfaces and hole patterns are available on request. The solid mounting bracket with turned back plate is characterised by a stable profile with a material thickness of 2.5 mm, making it the ideal choice for mounting medium-heavy loads. Installation is simplified by two elongated holes in the base plate, which make it easy to adjust the mounting bracket. Our wall brackets with a profile cross-section of 41/41 mm and a galvanised surface are specially designed for use in indoor or dry environments. All support brackets in the 41 series are of course also available in aluminium, which opens up additional areas of application. For increased loads, we also offer heavy-duty brackets with additional diagonal braces. The construction of our installation brackets with a profile of 41 x 41 x 2.5 mm is specially designed for the efficient and professional installation of systems such as water pipes or ventilation ducts in the domestic and industrial sanitary sector. In addition, the brackets are suitable for suspending cable trays and mesh cable trays as well as for suspending from ceiling structures. In our online shop you will find a wide selection of suitable fastening elements and an extensive range of mounting accessories to realise even the most demanding projects. All BULLFIX support brackets are manufactured in Germany and represent an economically attractive alternative to cantilever brackets from other suppliers in a direct comparison. Cantilever brackets from the Würth-Varfix, Walraven Rapidrail, Fischer FCA, Unistrut Cantilever Arm and Halfen KON series can be used as comparison products.     Suitable for this: Hammerhead bolts 41/22 Z, hammerhead fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid. Further mounting accessories and pipe clamps can be found in the corresponding category. For individual requirements, we also offer other lengths, hole patterns and surfaces on request.
Profile 41/41 - 2.5 mm - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 41 x 2.5 [mm]
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Extensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
The original Bullfix mounting profile 41/41 - your versatile partner for stable constructions
Whether you are working in the field of electrical installation, mechanical engineering or building services engineering, the Bullfix mounting profile 41/41 is an indispensable aid when it comes to the reliable and flexible fastening of a wide range of components.
Known under various names such as Unistrut rail, Halfen rail or mounting channel, this type of profile has established itself as the standard in fastening technology.
The 41/41 mounting rail is characterised by its high load-bearing capacity and adaptability. Made of steel, it provides an excellent basis for the realisation of complex constructions. With its square shape of 41 mm wide and 41 mm high, it is perfectly dimensioned to ensure both stability and flexibility in use.
In the steel version, the rail lip is serrated so that it can also support vertical loads in conjunction with the appropriate hammerhead bolts or threaded plates. The stainless steel version, on the other hand, is smooth and is therefore often used as a clamping rail for foil roofs.
A major advantage of the Bullfix support rail 41/41 is its extensive range of accessories. From screws and nuts to connecting elements, brackets and end caps - System 41 offers a solution for every challenge. The modular design allows you to realise individual requirements precisely and adapt them quickly and easily if necessary.
So if you are looking for a reliable and flexible mounting system to support your construction and installation work, the Bullfix mounting profile 41/41 is an excellent choice. With its versatility and the availability of a wide range of accessories, you will be able to realise your projects efficiently and successfully.
The Bullfix mounting rail 41/41 presents itself as an economical alternative to the established offerings of other leading manufacturers. This includes comparisons with similar products such as the Halfen HM 41/41 or HZL 41/41 mounting channels, Unistrut P1000, Hilti MQ-41 profile channels, the FUS 41 mounting channels from Fischer, Walraven RapidStrut, the JM K 41/41 and JML K 41/41 profiles from Pohlcon Jordahl, Sikla MS 41/41 and the modular profile system of the Varifix C 41/41 mounting channel from Würth.
This wide range of suppliers and systems ensures that a suitable mounting profile is available for every specific project challenge. In addition, the system components from Bullfix for System 41 are seamlessly compatible with the solutions from the aforementioned brands and vice versa.
Suitable for this: Hammer-head screws 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Double profile 41/21 - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 21 x 2.5 [mm]
Final dimension: (41 x 42 x 2.5 [mm])
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Comprehensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
Discover the versatility and robustness of our double-sided mounting profile 41/21 - an indispensable element for any demanding fastening and mounting project. This profile, also known as a double-sided Unistrut rail or Halfen rail, is a fundamental component in the modular construction of support systems.
The back-to-back welded mounting profile 41/21 is characterised by its two opposing rails, which offer double functionality. With its symmetrical shape, the profile enables flexible fastening options on both sides, which considerably simplifies the installation of cable trays, pipework or other technical components.
The high-quality galvanised steel construction guarantees high load-bearing capacity and durability, even under demanding conditions. The standardised profile allows quick and easy installation of connectors and accessories without the need for time-consuming drilling or welding work.
System 41, which includes the mounting profile, is characterised by an extensive range of accessories. From connecting elements to clamps and end caps - the system offers a wide range of components for seamless and efficient installation. The compatibility of the parts with each other ensures a high degree of flexibility and adaptability to individual project requirements.
The double-sided mounting profile 41/21 is also known by other names such as mounting rail, double rail, installation channel or support rail. These terms emphasise the wide range of uses and compatibility with a variety of applications in industry and trade.
In addition to our own high-quality range, you will also find products from other manufacturers on the market that offer comparable profiles. Examples include Hilti with the MQ21 D, Halfen with the HM 41/22 D or HZM 41/22 D, Sikla 41/21 D, Fischer FUS 21D, Würth double profile 41/44, or the Unistrut P3301T.
Our double-sided mounting profile 41/21 D is therefore the ideal choice for anyone looking for a reliable, flexible and durable solution for their mounting requirements. Discover the possibilities and expand your System 41 with our extensive range of accessories. Compatibility with products from other manufacturers enables a high degree of flexibility and facilitates integration into existing systems.
Suitable for this: Hammer-head screws 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Double profile 41/41 - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 41 x 2.5 [mm]
Final dimension: (41 x 82 x 2.5 [mm])
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Comprehensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
The double-sided mounting profile 41/41 is a versatile and robust element in the field of fastening technology. Known under various names such as Unistrut rail, mounting rail, support rail or Halfen rail, this profile provides an optimum basis for numerous construction and assembly tasks.
With its standardised width of 41 mm and double-sided design, the mounting profile enables flexible yet stable fastening of components and installation elements. The continuous perforations ensure a simple and adaptable connection with screws, nuts and special fastening elements, enabling customised and needs-based installation.
System 41 is characterised by an extensive range of accessories. These include connecting elements, end caps, brackets and clamps, which allow seamless integration into a wide variety of constructions. The variety of components makes the system extremely adaptable and opens up a wide range of possible applications - from electrical installations and mechanical engineering to complex industrial systems.
In addition to its functional flexibility, the mounting profile is characterised by its high load-bearing capacity and durability. The use of high-quality galvanised steel ensures excellent corrosion resistance and enables use in demanding environments.
The Bullfix double mounting rail 41/41 D presents itself as an extremely economically competitive option. Comparable systems such as the Halfen mounting channels HM 41/41 D and HZM 41/41 D, Hilti profile channels MQ41 D, Fischer mounting channels FUS 41D, Unistrut P1001T, the Sikla MS 41/41 D and the modular profile system Varifix C mounting channel double profile 41/82 from Würth, as well as many other 41 systems from well-known manufacturers, are challenged by the Bullfix mounting channel in terms of cost-benefit aspects. Thanks to its economically well thought-out design, the Bullfix mounting rail promises considerable cost savings not only when purchasing, but also in practical use, without compromising on quality and functionality.
Suitable for this: Hammer-head screws 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Hammer-head screw 41/22 Z - M8 x 30 mm - 88TZN
Toothed screw for 41 series profiles with continuous toothing for absorbing parallel and perpendicular shear and tensile loads.
Suitable for profiles: 41/22, 41/41, 41/62, 41/82 and the associated double profiles
Head dimensions:
M8: 34.5 x 19.5 x 9 mm (L x W x H) - thread length up to 30 mm
M10: 34.5 x 19.5 x 9 mm (L x W x H) - thread length up to 80 mm
M12: 34.5 x 19.5 x 9 mm (L x W x H) - thread length up to 100 mm
M16: 34.5 x 19.5 x 9 mm (L x W x H) - thread length up to 125 mm
Hammer-head and hook-head screws, often also referred to as HALFEN screws, are ideal for fastening accessories or loads to mounting or anchor rails.
The toothed hammer-head screw type 41/22 is inserted into the profile rail and securely fastened with a 90-degree turn. The special toothing of the hammer head ensures a maximally stable and resilient connection, even when installed vertically. Before the screw is finally tightened, it can be flexibly positioned within the profile rail.
The type designation indicates which profiles the screw is suitable for and does not refer to the dimensions of the screw head. An overview of the suitable screw types for the respective profiles can be found in the downloads.
Advantages at a glance:
Quick installation: The toothed screw 41/22 can be inserted directly into the mounting rail at the desired position without having to be inserted from the side.
High load-bearing capacity: The special shape of the head creates a larger contact surface, which favours the absorption of higher loads. The continuous toothing allows use in complex applications that require multidimensional loads to be accommodated.
Flexibility: The screw can be moved within the profile rail, enabling precise alignment of the components.
Reusability: Hammerhead screws can be easily loosened and reused if required.
Functionality and application:
Hammer-head and hook-head screws can be placed in any position in the profile. A 90 degree turn locks the head in the profile and ensures that it fits snugly against the rail lip. Even if the screw head is not accessible, a nut can be used to tighten the screw. The screws can be loosened, precisely aligned and refastened or removed at any time without the need for special tools. A slot on the underside of the thread indicates the correct alignment of the screw head in the mounting rail. The large contact surface of the screw head in the profile ensures high stability and load-bearing capacity. The serration allows loads to be securely attached even when installed vertically.
The hammer-head screw type 41/22 is an efficient fastening solution that saves time, offers flexible application options and is suitable for a wide range of applications. Discover the benefits of our hammer-head and hook-head screws and optimise your assembly processes with Bullfix. Our screws are also compatible with most systems from leading manufacturers. You can find an overview of the most common systems and the matching Bullfix screws in our information section.
The Bullfix toothed screw 41/22Z is an alternative to the toothed hammer-head screws from well-known manufacturers such as Jordahl type JZS 41/22, Halfen HZS 41/22, Hilti MIQA-T hammer-head screws, Sikla HZ 41 and Fischer FHS.
Hammerhead fastener 41/41 - M8 x 30 mm - ZN
Threaded plate with bolt pressed into a screw. Completely pre-assembled with washer and nut and therefore ready for immediate use. For quick and easy fastening of pipe clamps and other loads.
Suitable for profiles: 41/22, 41/41, 41/62, 41/82 and the associated double profiles
Head dimensions:
M8: 35 x 20 x 6 mm (L x W x H) - thread length up to 100 mm
M10: 35 x 20 x 6 mm (L x W x H) - thread length up to 100 mm
M12: 35 x 20 x 6 mm (L x W x H) - thread length up to 80 mm
Hammerhead fasteners are the cost-effective alternative to our hammerhead and hook-head screws. Our original Bullfix hammerhead fasteners are supplied pre-assembled including nut and washer.
They are used wherever relatively light loads need to be mounted at a large number of fixing points. This is mainly the case in the heating, air conditioning and sanitary sector.
As with the hammer-head screws, the hammer-head fasteners 41/41 can also be retrofitted via the profile slot and positioned precisely on the profile rail.
The type designation refers to the compatibility with different profiles and not to the dimensions of the screw head. An overview of the suitable screw types for different profiles is available in the downloads.
Advantages at a glance:
- Quick and easy installation: The hammer-head fastener 41/41 can be inserted directly into the mounting rail at the desired position, without the need to slide it in from the side.
- Completely pre-assembled, there is also no need to fit a washer and nut, which saves time during installation.
- Flexibility: The screw can be inserted inside the profile Flexibility: The screw can be moved within the profile rail and enables precise alignment of the components.
- Reusability: Like the hammerhead screws, the pre-assembled hammerhead fasteners are easy to remove and can be reused if required.
Functionality and application:
Hammerhead fasteners can be placed in any position in the profile, just like the hammerhead and hook-head bolts. A 90 degree turn locks the head in the profile and ensures that it fits snugly against the rail lip. Even if the screw head is not accessible, a nut can be used to tighten the screw. The screws can be loosened, precisely aligned and refastened or removed at any time without the need for special tools. A slot on the underside of the thread indicates the correct alignment of the screw head in the mounting rail. The large contact surface of the screw head in the profile ensures high stability and load-bearing capacity. The serration allows loads to be securely fastened even when installed vertically.
The pre-assembled hammer-head fastener 41/41 is an efficient fastening solution that saves time, offers flexible application options and is suitable for a wide range of applications. Discover the benefits of our hammer-head and hook-head fasteners and optimise your assembly processes with Bullfix. Our screws are also compatible with most systems from leading manufacturers. You can find an overview of the most common systems and the matching Bullfix screws in our information section.
The Bullfix hammerhead fastener 41/41 is an alternative to fastening screws from well-known manufacturers such as Würth Varifix hammerhead fastener Standardfix, Walraven Strut hammerhead fastening set, the Unistrut Stud Nut, OBO Bettermann MS41HB, Hilti HHK hammerhead screws or Fischer FCSN.
Heavy-duty bracket 41/41 - 300 mm - ZN
Dimensions: Profile: 41 x 41 x 2.5 [mm] Cantilever: 300 mm - 1,350 mm Rail slot: 18 mm Hole pattern: 13 x 20 [mm] at 40 mm intervals Backplate height: 281 - 877 mm Rail lip steel: fluted Rail lip stainless steel: smooth Matching screws: Hammerhead screws 41/21 Hammerhead fastener 41/41 Threaded plate 41/41 Threaded plate 41/41 with fixing aid Extensive range of mounting accessories. Other lengths, surfaces and hole patterns are available on request. Heavy-duty rail bracket for wall mounting - made in Germany. The tried-and-tested heavy-duty bracket in profile 41/41 with 2.5 mm wall thickness for particularly high requirements. The U-brace provides additional stability, the diagonal brace is mitred and welded flat, which enables loads of well over 300 kg, depending on the design. The profile rail of the galvanised mounting brackets is serrated on the rail lip, the stainless steel version is smooth (serrated on request) The hot-dip galvanised version of the support brackets is suitable for installation in damp rooms and outdoor areas. Easy to align thanks to two slotted holes in the base plate. All heavy-duty mounting brackets are also available in A4 stainless steel for special working environments. Often a mandatory material for many technical trades and buildings, such as bridge drains, sewage treatment plants, in chemical and pharmaceutical plant construction and in food processing plants. A4 stainless steel is also resistant to acid and seawater. Our heavy-duty supports are suitable for the professional construction of load-bearing structures, for example for pipework, ventilation ducts and cable trays, for bridge and building drainage or as supports for units and machine components. The serrated profile, in conjunction with the optionally available hammer-head bolts and threaded plates, ensures extremely secure connections. All BULLFIX support brackets are manufactured in Germany and, in direct comparison, represent an economically attractive alternative to cantilever brackets from other suppliers. Cantilever brackets from the Würth-Varfix heavy-duty bracket series, Walraven Strut wall brackets, Fischer cantilever arm FCAM,  and the Halfen KON 41/2 series can be used as comparison products. All BULLFIX brackets are manufactured in Germany. Suitable for our cantilever arms 41/41: hammerhead screws 41/22 Z, hammerhead fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid. Further mounting accessories and pipe clamps can be found in the corresponding category. For individual requirements, we also offer other lengths, hole patterns and surfaces on request.
Pipe clamp DIN 1593 - 419 mm - WB
Solid half clamps, heavy-duty design in accordance with DIN 1593 - without nuts and bolts.
Available as standard up to 220 mm internal diameter.
Material dimensions from 16 x 2 mm to 50 x 8 mm solid steel.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Screws must be purchased separately.
Please enquire for larger diameters.
Please refer to the data sheet for technical details.
Pipe clamp DIN 3567 - 419 mm - DN 400 - WB
Solid pipe clamps in accordance with DIN 3567 - without bolts and nuts.
Available as standard up to 220 mm internal diameter.
1 DIN pipe clamp consists of 2 half shells. Bolts and nuts must be purchased separately.
Available in mill finish, galvanised steel, hot-dip galvanised steel, A4 stainless steel.
Please enquire about larger diameters.
Please refer to the data sheet for technical details.
Profile 41/21 - 2.5 mm - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 21 x 2.5 [mm]
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Comprehensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
The 41/21 mounting profile - versatility meets stability
In the world of fastening technology, the Bullfix mounting profile 41/21 is a real all-rounder. This profile is an integral part of System 41, which is valued for its flexibility and robustness in a wide range of applications.
The designation 41/21 refers to the dimensions of the profile, with 41 mm being the width and 21 mm the height. The profile is available in various lengths, making it easy to customise to individual projects. The rail itself is made of high-quality galvanised steel, which guarantees a long service life.
A key advantage of the 41/21 mounting profile is its versatility. It serves as a supporting structure for various installation constructions - from pipework and electrical cabling to ventilation systems. Thanks to the continuous perforation, fastening elements can be attached flexibly and quickly at any desired position. This saves time and enables simple readjustment if required.
In the steel version, the rail lip is serrated so that it can also support vertical loads. The stainless steel version, on the other hand, is smooth and is therefore often used as a clamping rail for foil roofs.
System 41 also offers an extensive range of accessories. These include connecting elements, end caps, brackets and clamps. These components are specially matched to the mounting profile and enable quick and secure installation.
In addition to the names Unistrut rail or Halfen rail, terms such as mounting rail, installation channel or support rail are also commonly used. These synonyms emphasise the wide range of applications and the universal nature of the profile.
The Bullfix mounting rail 41/21 is a cost-effective alternative to the products of other system manufacturers, for example Halfen with the mounting rails HM 41/21 and HZL 41/22, Hilti with its profile rails MQ-21 and MQ-21.5, Unistrut P3300, Walraven RapidStrut, Fischer with its FUS 21 mounting channels, Pohlcon Jordahl with the JZM K 41/22 and JZML K 41/22 profile, Sikla MS 41/21 or Würth, which offers similar solutions with its modular profile construction kit for the Varifix C mounting channel 41/22. This variety of manufacturers and systems ensures that the right mounting profile can be found for every project and every requirement. The Bullfix system components for System 41 are compatible with the system solutions of the manufacturers listed here.
The Bullfix mounting profile 41/21 is therefore a reliable, flexible and efficient solution for numerous mounting requirements. With the wide range of available accessories and compatibility with products from other manufacturers, it offers a universal basis for the realisation of projects in industry and trade.
Suitable for this: Hammer-head screws 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Profile 41/62 - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 62 x 2.5 [mm]
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Extensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
Discover the mounting profile 41/62 - your robust solution for demanding constructions
If you are looking for a stable and reliable fastening solution, then the 41/62 mounting rail is just right for your project. As an extended version of the tried-and-tested 41/21 and 41/41 profiles, the 41/62 profile offers greater load-bearing capacity and stability, making it the ideal choice for more demanding constructions.
Mounting profile 41/62, often referred to as Unistrut rail or Halfen rail, is a true all-rounder in the field of fastening technology. Thanks to its reinforced design, it is particularly resistant to high loads and mechanical influences. With a width of 41 mm and a height of 62 mm, it offers a larger contact surface and therefore improved force distribution.
In the steel version, the rail lip is serrated so that it can also support vertical loads in conjunction with the appropriate hammerhead bolts or threaded plates. The stainless steel version, on the other hand, is smooth and is therefore often used as a clamping rail for foil roofs.
As part of the versatile System 41, a wide range of accessories is available for the mounting profile 41/62. From connecting elements to brackets and clamps - this system allows you to realise your installation ideas flexibly and efficiently. Its compatibility with a wide range of accessories makes it a universal solution for a wide variety of applications in electrical engineering, mechanical engineering, building services engineering and many other areas.
In addition to its functional diversity, the profile is characterised by its ease of installation. The continuous perforation allows flexible positioning of the fastening elements, making it easier to adapt to individual circumstances. Whether as a mounting rail, installation rail or support rail - the 41/62 profile is synonymous with efficiency and reliability.
The Bullfix mounting rail 41/62 offers a cost-effective solution that can compete directly with established products from other suppliers. There are similar alternatives such as Halfen HM 41/62 and HL 41/62 mounting channels, Hilti MQ-52 profile channels, Fischer FUS 62 mounting channels, Pohlcon Jordahl JM K 41/41 and JML K 41/41 profiles, Unistrut P5500T, Sikla MS 41/62, Walraven RapidStrut and the modular Varifix C 41/62 mounting channel profile system from Würth. Thanks to its economical design, the Bullfix mounting rail offers an attractive alternative that promises cost benefits both in terms of purchase and use, without compromising on quality and functionality.
Rely on the 41/62 mounting profile for your projects where the highest demands are placed on load-bearing capacity and flexibility. Benefit from the extensive selection of accessories and the expertise of leading manufacturers to realise your constructions safely and efficiently.
Suitable for this: Hammer-head bolts 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Profile 41/82 - 1,000 mm - perforated - WB
Dimensions:
Profile: 41 x 82 x 2.5 [mm]
Rail slot: 22 mm
Hole pattern: 13 x 40 [mm] at 60 mm centres
Steel rail lip: knurled
Stainless steel rail lip: smooth
Matching screws:
Hammer-head screws 41/21
Hammer-head fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Extensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
Mounting profile 41/82 - Optimising the load-bearing capacity
In the world of mounting technology, the 41/82 mounting rail represents a high-performance evolution of the tried-and-tested 41/21, 41/41 and 41/62 profiles. As a higher version within the 41 profile series, it offers improved load-bearing capacity and stability, making it the first choice for demanding constructions.
Profile 41/82, often referred to as the Unistrut rail or Halfen rail, is characterised by its robust design. With an increased profile height, it is predestined for applications where a higher load-bearing capacity and an extended support spacing are required. These properties make it an indispensable element for the modular construction of load-bearing structures in industry and construction.
The versatility of the 41/82 mounting profile is complemented by an extensive range of compatible accessories. From connecting elements and clamps to base plates - System 41 enables flexible and secure installation. The accessories are designed to ensure quick and easy installation, saving time and money.
In addition to the name Unistrut or Halfen rail, other synonyms such as mounting channel, installation profile or support rail are in circulation, emphasising the multifunctional applicability and cross-industry use of the profile.
The Bullfix mounting rail 41/62 presents itself as an extremely economically competitive option. Comparable systems such as the Halfen mounting channels HM 41/83 and HL 41/83, the Hilti profile channels MQ-72, Fischer mounting channels FUS 62, the Unistrut P5000T, the Pohlcon Jordahl profiles JM K 41/41 and JML K 41/41, Walraven RapidStrut, the Sikla MS 41/62 and the modular profile system Varifix C mounting channel 41/62 from Würth are challenged by the Bullfix mounting rail in terms of cost-benefit aspects. Thanks to its economically well thought-out design, the Bullfix mounting rail promises considerable cost savings not only in terms of purchase, but also in practical use, without compromising on quality and functionality.
We recommend that you familiarise yourself with the specifications and possible applications of the 41/82 mounting profile in order to find the optimum solution for your design requirements. Our range includes a wide range of profiles and accessories that guarantee high quality and reliability.
Suitable for this: Hammer-head screws 41/22 Z, hammer-head fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.
Produktinformationen Bracket 41/41 - 600 mm - ZN
Rail bracket for mounting on the wall - made in Germany.
Dimensions:
Profile: 41 x 41 x 2.5 [mm]
Bracket: 200 mm - 1,000 mm
Rail slot: 18 mm
Hole pattern: 13 x 20 [mm] at 50 mm centres
Steel rail lip: fluted
Stainless steel rail lip: smooth
Matching screws:
Hammerhead screws 41/21
Hammerhead fastener 41/41
Threaded plate 41/41
Threaded plate 41/41 with fixing aid
Extensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
 
Discover the flagship of BULLFIX - our solid mounting bracket. This bracket is characterised by a stable profile measuring 41 x 41 mm and a material thickness of 2.5 mm and is the ideal choice for mounting loads in the medium range. Installation is particularly easy thanks to two elongated holes in the base plate, which allow the support bracket to be easily adjusted.
Our wall brackets with the tried-and-tested 41/41 mm profile cross-section and galvanised surface have been specially developed for use indoors or in dry environments. A considerable proportion of our range of mounting brackets is also available in a stainless steel version. We also offer our support brackets in profile 41/41 as heavy-duty brackets with an additional diagonal brace for increased loads.
The installation brackets with the 41 x 41 x 2.5 mm profile are specially designed for efficient and professional installation of systems such as water pipes or ventilation ducts in the domestic and industrial sanitary sector.
As a further possible application, the brackets can be used as a suspension bracket for suspending cable trays and mesh cable trays as support systems on ceiling structures.
In our online shop you will find a selection of suitable hammer-head bolts and threaded plates for our cantilever brackets as well as a comprehensive range of installation accessories to realise even complex construction projects. All BULLFIX cantilever brackets are produced in Germany.
In direct comparison with products from other suppliers, BULLFIX cantilever brackets offer an economically favourable alternative. Comparable products include brackets from the Würth-Varfix series, Walraven Rapidrail wall brackets, Fischer FCA cantilever brackets, Unistrut cantilever arms or brackets from the Halfen KON series.
 
Suitable for this: Hammerhead bolts 41/22 Z, hammerhead fastener 41/41, threaded plate 41/41, threaded plate 41/41 with fixing aid.
Further mounting accessories and pipe clamps can be found in the corresponding category.
For individual requirements, we also offer other lengths, hole patterns and surfaces on request.