Bracket 26/18 - 300 mm - ZN
Product number:
KO2618.300.ZN
Produktinformationen Bracket 26/18 - 300 mm - ZN
Rail bracket for mounting on the wall - made in Germany.
Dimensions:
Profile: 26 x 18 x 1.5 [mm]
Rail slot: 12 mm
Rail lip: smooth
Hole pattern: 9 x 20 [mm] at 45 mm centres
Matching screws:
Hammerhead fastener 26/18
Threaded plate 28/15
Extensive range of mounting accessories.
Other lengths, surfaces and hole patterns are available on request.
 
The classic from BULLFIX. The inexpensive mounting bracket. The lightweight 26/18 profile with 1.25 mm wall thickness is ideal as an installation bracket for low loads. Thanks to two slotted holes in the base plate, the cantilever bracket is very easy to align.
The lightweight wall brackets in profile 26/18 with a galvanised finish are intended for indoor use or in a dry environment. Most models of our mounting brackets are also available in stainless steel.
Our cantilever brackets in profile 26/18 are primarily suitable for the quick and professional fastening of, for example, water pipes or ventilation ducts in the sanitary home sector.
Alternatively, the bracket can also be used as a suspension rod for suspending cable trays and mesh cable trays from the ceiling.
In our shop you will find the matching hammerhead bolts and threaded plates for our cantilever arms as well as a comprehensive range of mounting accessories for creating complex structures.
All BULLFIX cantilever brackets are manufactured in Germany.
The Bullfix cantilever brackets generally stand out as an economically competitive alternative to brackets from other manufacturers. Examples include the brackets from the Würth-Varfix series, Walraven Rapidrail wall brackets, Fischer FCA cantilever brackets, Unistrut Cantilever Arms or the brackets from the Halfen KON series.
Suitable for this: Hammerhead fastener 26/18, threaded plate 28/15
Further accessories: see category Mounting accessories and pipe clamps
Other lengths, hole patterns and surfaces on request.